ISOLATED HOT & COLD WATER SUPPLY SYSTEM
><><> HOME ABOUT US CONTACT US ORDER CATALOG BE A DEALER <><><><><><><>	The Cotswold WaterMaster has the ability to provide continuous or intermittent quantities of hot water whilst maintaining water temperature. The pre-set hot water temperature is maintained until the very last drop is used - only then is fresh water admitted to the hot water tank, to be heated for the next wash cycle. a large 30 gallon (135 litre) insulated water boiler with stainless steel fittings (including the element) a 20 gallon (90 litre) cold water tank with brass ball float-valve (no solenoid valves), and 2 electric pumps. These pumps can supply hot or cold water - under pressure - on demand. a 24-hour or 48-hour time clock.
	To meet the "positive seperation" (avoidance of back-syphoning) requirements of most water suppliers and councils, we introduce the Water Master. The system complies with all regulations and byelaws and is ideal for situations where hot and/or cold water are required to be mixed with chemicals prior to tank-cleaning. An important feature of the WaterMaster is its ability to provide a continuous or intermittent quantities of hot water whilst maintaining water temperature. The pre-set hot water temperature is maintained until the very last drop is used - only then is fresh water admitted to the hot water tank, to be heated for the next wash cycle. The water master is entirely automatic, and requires no hard-wiring between the external cleaning apparatus and its own integral pumps. It comes as standard with a 24-hour time clock, or an optional 48-hour timer can be supplied. The integral timer clocks allow for full advantage to be taken of low-cost off-peak electricity tarriffs. The 48-hour timer allows the user to synchronise the pre-heating of water to 48-hour tanker collections.